Safety Basics: Fire Exits & Egress

Safety Basics: Fire Exits & Egress

In 1911, 146 workers were killed within 18 minutes at the Triangle Shirtwaist Factory in New York City after a fire broke out and they were unable to escape due to locked exit doors. As you can imagine, this tragedy helped pave the way for improved safety codes and other regulations across the country.

MSD’s written emergency action plan (EAP) is reviewed during orientation and with employees who have transferred into a new role. It is also available for review on the employee portal. For a fire emergency, the plan covers evacuation procedures, accounting for evacuated employees, aiding employees with disabilities and visitors, emergency contact numbers, and the means of alerting employees in case of an evacuation.

Fire Exit & Egress Information to Know:

  • Maintain two means of egress.
  • Exit doors shall be side hinged and open outward.
  • Exit doors must be unlocked – employees must be able to open an exit route door from the inside at all times without keys, tools, or special knowledge.
  • Never block fire exits, exit routes, or stairwells.
  • Keep means of egress free of all obstructions and impediments.
  • Ensure exits are marked by a readily visible sign.

Whether you are at work, visiting a restaurant, or attending an event be sure to review exit route maps or scan for exit signs so you are prepared to evacuate in case of an emergency.

Safety Always!

Vicki Dix

WPAFB Sensors Lab

Wright-Patt Air Force Base sought contractors to renovate and add onto the Sensors Lab. The HVAC portion of the project was over $13 million.

  • MSD served as the Design Assist Contractor in conjunction with Heapy Engineering for this project. In collaborating with General Contractor, Butt Construction, MSD provided Design Assist solutions for the following:
    • A large, anechoic chamber
    • An outdoor range
    • Multiple, Class-100 clean rooms
    • A three-story office building addition with DCID 6-9 requirements on many of the rooms

WPAFB Chilled Water System

The chilled water system at a high-security building on the Air Force Base was undersized and unable to keep up with demand. The facility could not operate without chilled water due to the amount of information servers in the building, and the general nature of the building itself. The entire upgrade project would need to be completed with minimal shut down time at the building. HVAC portion of this project was over $3 million.

  • MSD worked in collaboration with Diaz Construction to complete the system upgrades on time and on budget with minimal shutdowns or disruption to the facility operations.

LJB, Inc.

LJB, Inc. was renovating their Miamisburg, OH office and wanted to incorporate energy-saving upgrades.

  • MSD provided Design Build services in tandem with Greensleeves Energy Solutions, a specialist in geothermal systems.
  • MSD and Greensleeves installed a new geothermal HVAC system with open and closed loops. In addition, MSD design and installed the plumbing portion of the renovation.